Anatomy of a Steel Building: Standing Seam and Screw Down Roofing Systems.

Anatomy of a Steel Building: Standing Seam and Screw Down Roofing Systems.


Last week, in our 4-part blog series titled, The Anatomy of a Steel Building:Rigid Frames, Purlins & Girts,  we discussed the different types of first and secondary support systems in a prefab steel building. We suggest going back and reading that post once you’re done here. This week’s topic of discussion is two standard types of roofing systems, the differences  between them, and the pros and cons for both.

Standing Seam:

The standing seam panel is amongst the most versatile, durable and maintenance-free types of roofing system. Standing seam panels are installed using a clip and interlock design which conceals fasteners and prevents water from leaking in. See figure below of a typical detail for a double lock panel.
Please note this is just one of many types of standing seam panels. Check with the steel structure company you are working with to see other available options.

                                          Double Lock Standing Seam Panel









Pros:
  • The panels for standing seam systems are usually 24-22-gauge Galvalume steel.
  • Due to their concealed fasteners, the interlock design of a standing seam panel keeps water out.
  • Does not require routine maintenance.
  • Is ideal when the need for large R-value insulation systems are needed.
Cons:
  • Standing seam panels are typically more expensive to that of traditional screw down panels due to the thickness of the metal and the maintenance free interlocking design.
  • The price for installation is usually more expensive.
  • Special hand/powered seamers are required for installation.
  • Standing seam panels should be inspected more often in areas that have high-wind, although this should not be a problem.

Pop Quiz:
What component assists in bracing the structure and allows for roof panels to attach?
  • Rigid Frame
  • Girts
  • Purlins
Leave your answer in the comment section.

Screw Down Roof:

Like most standing seam panels, screw down panels attached to a prefab steel building with fasteners. However, despite being made from the same material, the two are considerably different.  As the name implies, the panels of a screw down roof are,…well,…..screwed down – leaving the fasteners exposed. The panels overlap each other almost in a layered like fashion while the fasteners attach the roof sheeting to the main structure and each other. (More details to come with specific information for unloading, storing and installing roof panels best practice) See figure below of a typical detail of a roof panel.

PBR Panel









Pros:
  • Roof sheeting is usually less expensive to that of the standing seam panel.
  • Save time and money on installation.
  • Does not require additional tools to install.
Cons:
  • Exposed fasteners on screw down roof.
  • Easy to install, easier to install incorrectly. Please READ all installation/erection manuals that come with your building.
  • Does not support large R-value insulation.


Make sure you understand your needs and the needs of the project before deciding which roof system to go with. Are you in colder climate and require an uncompressed, high R-value insulation? Does your city have requirements as to which type of roof system you can use? Is money an issue? As always, please make sure you are communicating with your local permit/building departments and project manager or coordinator you are working with from the prefabricated metal building company.


For more information about the Anatomy of a Steel Building, CLICK HERE or give us a call 888-783-3535

You can also Tweet us @coastalsteel

And, don’t forget to subscribe, share and comment!

Comments

Post a Comment

Popular posts from this blog

Anatomy of a Steel Building: Accessories Prefab Buildings Can’t Do Without.

Image
Anatomy of a Steel Building: Accessories One of the most appealing aspects of a prefabricated metal building are the host of accessory options to choose from. From bikes to trains to video games, the range and function of accessories for prefabricated metal buildings are almost endless. In this, the third in a four part blog series of the  anatomy of a steel building , we will discuss the main accessories most prefabricated metal buildings can’t do without and a few we think you should know. And if you haven’t read part 1 and 2 of this blog series go back to get helpful information and tips to further your understanding of the  anatomy of a steel building. The Must Haves Walk Door and Optional Accessories: Standard walkdoors are the most common type of accessory. Pre-assembled and constructed from 20-to-16 gaged galvanized steel and include an insulated core. The R-Value should be considered when used in colder climates. Check with your prefabricated steel building manufac
Read more

What Everybody Should Know About Steel Buildings

From first-time builders to the urban planner, when it comes to prefabricated buildings, there are a few key points every non-industry guy and gal should know. What Everybody Ought to Know About Prefabricated Steel Buildings Efficient Fabrication In the golden age of automation, efficiency is key. Due to advanced CAD/CAM processes, fabrication of  steel buildings  produce minimal raw material waste yet still able to meet the strictest strength-to-weight ratios. In fact, steel has the highest strength-to-weight ratio of any material, 25 times greater than wood. A lighter frame translates into a more cost-effective foundation and the ability to add other materials with less concern for the completed building weight.  Shorter Construction Time Steel buildings are designed and pre-built for easy reassembly at the manufacturing plant. Site preparation, such as the preparation and foundation placement, can be completed as the building is being manufactured. Once complete, the
Read more